ELECTRONIC COMPONENTS
Sensors & controllers (in the 3D greenhouse)
Sensors, controllers and compute parts used in the greenhouse model, plus phone and compute components sourced on request. Every line is quote-based.
Inspect the component assembly
3D model loads when you scroll here
Authored real-time 3D using the greenhouse models, not supplier CAD or photographs.
Parts list (37)
- Digital Thermostat Controller 120VSwitch a compatible electrical load in response to its temperature probe, within the exact controller and load ratings. It does not replace a commissioned greenhouse climate computer.
- HOBO Temperature/RH Data LoggerRecord temperature and humidity near the crop or packing operation so the operator can review conditions.
- Priva ConnextCoordinate commissioned greenhouse climate measurements and compatible actuators through a climate/process computer.
- Priva weather stationMeasure outdoor weather inputs that help the operator and a configured climate system interpret conditions.
- Canopy temperature & humidity probeMeasure the air conditions around a representative crop-canopy position.
- Sensor radiation shieldShield a compatible air probe from direct radiation while permitting air exchange.
- Substrate moisture & temperature probeMeasure conditions within a representative growing slab or container.
- Crop-level light sensorMeasure the light received near the crop at its specified measurement plane.
- Outdoor weather-station mastHold the selected weather sensors above the immediate greenhouse obstructions.
- Outdoor wind sensorMeasure wind conditions used by the greenhouse weather and vent-control strategy.
- Outdoor rain sensorDetect rain for the configured greenhouse ventilation strategy.
- Greenhouse climate control cabinetCoordinate the selected crop sensors and commissioned climate equipment.
- Industrial sensor & actuator I/O moduleConnect compatible physical signals to the greenhouse controller.
- Motor contactor & overload protectionSwitch and protect a specified greenhouse motor circuit.
- Local equipment disconnectProvide the designed means to isolate a greenhouse equipment circuit for servicing.
- Weather-resistant control enclosureProtect compatible greenhouse control components from their operating environment.
- Greenhouse alarm beaconMake a configured equipment or growing-condition alarm visible to the operator.
- Greenhouse CO₂ monitorMeasure carbon-dioxide concentration at the designated crop-environment monitoring point.
- Shade-drive solar panelHarvest sunlight for an independently powered shade-drive module.
- Solar battery charge controllerManage charging between the matched solar panel and battery.
- Shade-drive buffer batteryProvide power for motor starts and operation when sunlight is insufficient.
- Reversing motor driver & fuseDrive the shade motor in either direction with a protected, rated power path.
- Arduino-compatible climate sensor nodeRead local climate sensors and report the zone condition to the greenhouse coordinator.
- Greenhouse zone communication nodeShare measurements and target profiles between greenhouse zones.
- Crop-plane PAR quantum sensorMeasure photosynthetic photon flux for light monitoring and daily light integral.
- Shade end-of-travel limit switchStop the screen at its open and closed travel limits.
- Leaf-wetness sensorDetect surface wetness so the misting strategy can avoid unnecessarily wet foliage.
- Shielded sensor field cableCarry a compatible sensor signal from its crop location to the local node.
- Weather-resistant cable glandSeal and strain-relieve a cable where it enters the control cabinet.
- Sealed field connectorMake a serviceable keyed connection between a sensor and its cable.
- Local controller memory cardKeep camera images and local growing-condition records when the network is unavailable.
- Protected DC voltage converterConvert the local battery voltage to a stable supply for the sensors and computer.
- Greenhouse network gatewayCompare time-aligned climate records across greenhouses and distribute approved target recipes.
- Fixed crop observation cameraPhotograph the same crop area over time so the team can compare growth, color and canopy coverage.
- Adjustable crop-camera bracketHold the camera at a repeatable angle above the crop zone.
- Camera enclosure optical windowProtect the camera lens from splashes while keeping the monitored view clear.
- Camera scale & color reference targetProvide a fixed scale and color reference for comparing repeated crop images.
Related products
Measure: sensing core + crop camera (17 shared parts) ↗Phone & compute parts (modelled) (7 shared parts) ↗Respond: solar vent, misting, reflection and shade (6 shared parts) ↗Sensor Scout kit (6 shared parts) ↗Vent & Shade Mover kit (6 shared parts) ↗Crop Eye camera kit (5 shared parts) ↗
All products & quote basket ↗Tomato sales ↗Greenhouse Living System ↗
One Forem network
From the greenhouse
to the buyer.
Choose products, plan a project or request a produce program. Each route explains how prices, availability and delivery are confirmed.
- 01 / See itInside the greenhouseExplore all 212 components in place and follow any part from storage to the crop.
- 02 / Choose itAll products & quote basketOne catalog for named products and greenhouse parts. Add items and request a single quote.
- 03 / Build itSetups, electronics & robot kitsThe complete greenhouse setup from starter to full build, plus DIY AI robot kits.
- 04 / Buy the cropFarm Fresh to MarketExplore the documented tomato, citrus, pepper, vegetable and fruit range. Request your pack and supply program.
- 05 / Build the farmFarm Infrastructure salesStructure, growing systems and installation scope for a complete farm setup. A separate sales business within Forem.
- 06 / Plan itGreenhouse Living SystemExplore the greenhouse, growing systems, shared intelligence and energy planning under Forem Farm Infrastructure.
