House A
Review this house’s targets
- Shade request
- 100%
- Vent request
- 17%
- Mist request
- Off
- Air VPD
- 1.25 kPa
Targets: 24 mol/m²/day · 26°C · mist below 70% RH
This screen cannot reach the light target at full deployment.
FARM FRESH TO MARKET / INSIDE THE GREENHOUSE
Look closer. Explore the crop, examine every connection, and trace each component from the supply store to the growing system.
Explore all 212 components Configure six greenhouse modulesOpening the greenhouse…
Preparing the crop, surfaces and component details.Tomato Trellis Clips — 100 count
TIPSelect a part. Inspect its details and follow its route from the supply store to its working position.
Keyboard: arrows to orbit, Shift + arrows to pan, + / − to zoom, Home for overview and Esc to pause.
ONE SEED. AN ENTIRE SYSTEM.
Sow one seed into each propagation plug. Tray labels preserve the variety, sowing date and batch as the roots establish.
EXPLORE THE PARTS
From the first frame connection to the clip around a tomato vine. Find a part, understand its job and follow it into the greenhouse.
212 parts across 9 greenhouse systems212 parts to explore
Forem / CLIMATE BY DESIGN
01 / THE CLIMATE RECIPE
Each greenhouse measures its own conditions. Connected zones share the recipe; local controls respond to the crop in front of them.
Coordinate canopy light, fruit development and moisture removal.
Editable example recipe · tailor settings to cultivar, growth stage, location and grower measurements.
Air VPD 1.70 kPa · steady-light equivalent 28.7 mol/m²/day. This screen cannot reduce light to the selected target even at full deployment. This shows control requests, not a prediction that the targets will be reached. The light estimate uses uniform area coverage and the selected material reduction; real canopy readings account for transmission and moving shadows. Real control uses changing measurements, hysteresis and local interlocks.
COMPARE / ADAPT / REPEAT
Choose a reference crop, compare the conditions and share its targets. Each greenhouse still measures its own light, temperature and humidity. A different crop stage keeps a different recipe.
INTERACTIVE SCENARIO · MANUAL READINGSTargets: 24 mol/m²/day · 26°C · mist below 70% RH
This screen cannot reach the light target at full deployment.
Targets: 20 mol/m²/day · 25°C · mist below 72% RH
This screen cannot reach the light target at full deployment.
Targets: 16 mol/m²/day · 24°C · mist below 75% RH
This screen cannot reach the light target at full deployment.
Use repeatable crop images, harvest quality and growth records to select a reference. Equal sensor readings alone do not prove equal plant health, yield or quality. This page does not analyze live camera images.
The shared values are targets—not copied motor positions. Shade, ventilation and mist respond locally. Calibration, leaf wetness, actuator travel limits and manual override belong in the installed system.
02 / FROM THE GROUND UP
Surface choices are alternatives. Layer depths, foundations and drainage follow the site; growing bags and slab beds use different root-zone details.
03 / THE SHADE DRIVE
Separate motor modules can make a greenhouse easier to expand and service. A shared crop recipe coordinates them, while each module retains its travel limits and manual control.
Solar power is sized for the whole daily load and motor starting current. Cable selection includes stretch, UV life and working tension.
04 / WORK WITH THE SUN
Reflective film can redirect available light into a darker crop area. Start with the sun path and greenhouse orientation, then measure canopy light and leaf temperature across the day.
85.6° approximate sun elevation
Manual geometry study. This angle is not calculated as an optimum from sun elevation.
Solar time differs from clock time. Elevation alone does not determine reflector placement: azimuth, greenhouse heading, obstructions, target area and film properties also matter. Use flat, restrained surfaces and verify light uniformity.
MYLAR / POSITION + DIRECTION
Use the latitude, day and solar hour at left. Set the building direction and the crop point relative to a flat reflector.
One ideal specular ray at one instant. This is not a measured light gain or an optimum greenhouse layout. Film wrinkles, diffuse reflection, covering transmission, shadows, leaf temperature and the moving sun still need evaluation. The 3D manual tilt at left is a separate illustration.
The panel normal bisects the directions toward the sun and crop target. Solar hour is true local solar time, not clock time. The studio uses approximate seasonal declination without atmospheric refraction.
NOAA solar-position relationshipsOregon State: law of reflectionThe model contains 1,248 individual plant positions over a 600 m² growing footprint within the 864 m² building. That is 0.48 m² per plant, with the remaining length reserved for cross-aisles and services. Plant number and training method are selected with the crop plan. The three recipes above are editable demonstration settings, not published cultivar optima.
Measure plant light with a suitable PAR sensor and integrate it over time. Coordinate circulation with ventilation; mist adds humidity and is constrained by evaporation and leaf-wetness conditions.
THE SAME GREENHOUSE. MORE POSSIBILITIES.
A frame and a covering protect a crop. Thoughtful additions make that shelter responsive: a roof that opens, shade that travels, air that circulates, and water delivered where it is needed.
Our ambition is to make those capabilities accessible—one practical, serviceable component at a time.
A person checks the temperature, opens a vent, pulls a screen, waters a row and returns later to see what changed.
Each bay reports its conditions. Local controls move the shade, vent and mist within set limits. Growers compare the response and refine the recipe for that crop stage.
SMALL ADDITIONS. CLEAR COSTS.
A low-cost board can begin the experiment. A working installation also needs power, protection, a suitable drive and commissioning. Explore what each price actually buys.
A Wi-Fi board, air temperature/RH sensor and basic illuminance board let the team record and compare conditions.
THE GREENHOUSE NETWORK
A camera adds a second view of the crop: repeated images can help flag growth changes, canopy gaps or fruit-color changes for review. Light and climate sensors supply the measurements the image cannot.
Share the crop-stage targets and compare measured outcomes. Different greenhouses may need different shade, vent and mist commands to approach the same target. Equal commands do not mean equal crop conditions.
One growing environment. Three control scenarios.
Compare the same cultivar and growth stage. Each bay measures its own daily light and climate.
THE CURRENT HARVEST WORKSHOP / MECHANICAL STUDY
The fixed mast guides a carriage carrying the crop tools and RGB camera. The supported approach stage moves one tomato suction cup with an interchangeable tip, or the pepper heated-wire head and support basket. Explore the connected mechanism, model dimensions and travel limits below.
Forem Labs / ROLL · LIFT · APPROACH
One cup. One grape tomato.Forem Greenhouse Harvester · positioning model
Two soft guides beside the picking head could extend into the foliage, part leaves and retract. This is a motion illustration; force limits, snag response and plant damage need testing.
WORKING ENVELOPE / METRES
All dimensions are design assumptions for the greenhouse model. The controls move connected geometry; they do not operate equipment or establish load capacity.
Manual controls show roll, lift and approach. Use the picking cycle to follow the fruit into the catch basket and main case.
TOOL HEAD / CLOSE APPROACH
The approach motor turns the screw. Its moving nut slides the deck and the single suction cup toward the crop. The camera stays on the lift carriage. The echo sensor moves with the tip to check the remaining gap.
Open the close-up, then advance three times to see the tool head move toward the same fruit. The camera view holds steady so you can see the gap close.
Aisle travel is held while the carriage is raised or the tools extend. This is a preview interlock, not a validated machine safeguard.
The full-hardware gap is smaller than the wheel gap. Both are model geometry only; foliage, crop movement, floor variation and safe operating clearance are unverified.
Earlier linear-lift workshop reference: a narrow aisle cart, a guided lift and a short-reach suction-and-cutting head. Its assembly steps and budget remain available for comparison. The Forem Greenhouse Harvester shares one supported suction cup, one ordinary camera, proposed close-range acoustic sensing and a guarded heated-wire stem cutter across tomato and pepper modes. Optional soft leaf guides part the canopy; crop fit and all handling outcomes need trials.
The following dimensions, assembly steps and costs describe the earlier single-cup guided-head cart. They do not price or specify the current mast, modular cup tooling or heated-wire system. Use the current machine build budget for that scope.
0.62 m wide · 1.5 m mast · 0.3 m reach
Historical workshop reference · Earlier Forem linear-lift development architecture
EARLIER WORKSHOP SCENARIO
Start with sourced components, fabricate the frame and fixtures locally, then assemble, program and trial the machine. Change the labor assumptions to fit your team.
An adjustable development budget, not a production selling price. Freight, tax, business overhead and repeated redesigns are additional. A successful crop trial is required before performance can be stated.
| Component | Qty | Unit / USD | Basis | Explore |
|---|---|---|---|---|
| Chassis tube, plates & fastenersEditable planning allowance, not a supplier quote. Material only; cutting, joining and finishing labor is separate. | 1 | $120 | planning allowance | Source ↗ |
| Wheels, casters & hubsEditable planning allowance, not a supplier quote. Two driven wheel assemblies and two passive casters; verify load and hub fit. | 4 | $18 | planning allowance | Source ↗ |
| 37D gearmotor including encoderTwo light-cart candidates; gearmotor sizing and continuous duty remain to be validated. | 2 | $61 | supplier reference | Source ↗ |
| Wheel encoderIncluded in each selected gearmotor; shown separately for service, not charged twice. | 2 | $0 | included | Source ↗ |
| Dual motor driver, partial kitConnector assembly and suitable current limiting are required. | 1 | $70 | supplier reference | Source ↗ |
| 12V 7Ah reference batteryReuses the 17 October battery price reference; actual robot energy, peak current and charger are not selected. Supplier page/data availability conflict needs confirmation. | 1 | $40 | supplier reference | Source ↗ |
| Fuse, disconnect, DC converter & harnessEditable planning allowance, not a supplier quote. Specify battery protection, connector ratings and voltage conversion. | 1 | $55 | planning allowance | Source ↗ |
| RGB tool camera moduleCamera alone; no depth module or trained harvesting model is included. | 1 | $29 | supplier reference | Source ↗ |
| Capture/control computer boardOut-of-stock reference; memory, supply and camera adapter are included only in the harness allowance, pending exact selection. | 1 | $19 | supplier reference | Source ↗ |
| Mast extrusion, brackets & guardingEditable planning allowance, not a supplier quote. Verify stiffness and resistance to tipping at full reach. | 1 | $90 | planning allowance | Source ↗ |
| Vertical and short-reach guide componentsEditable planning allowance, not a supplier quote. Budget envelope for guides and carriages; replace with load- and travel-specific quotes. | 1 | $160 | planning allowance | Source ↗ |
| Lift drive, transmission & anti-drop partsEditable planning allowance, not a supplier quote. A complete vertical-axis load-holding design may exceed this allowance. | 1 | $120 | planning allowance | Source ↗ |
| Compliant wrist materials & hardwareEditable planning allowance, not a supplier quote. In-house machined/printed non-contact structure; validate force and cleanability. | 1 | $45 | planning allowance | Source ↗ |
| Food-contact compliant cup & fittingEditable planning allowance, not a supplier quote. Select a size for the actual tomato; purchase a documented contact material. | 1 | $30 | planning allowance | Source ↗ |
| Mini vacuum pump, bench candidateA larger, continuous-duty pump may be required after leakage and thermal testing. | 1 | $6 | supplier reference | Source ↗ |
| Filter and cleanable catch vesselEditable planning allowance, not a supplier quote. Allow for replaceable elements and low pressure drop. | 1 | $25 | planning allowance | Source ↗ |
| Vacuum hose and fittingsEditable planning allowance, not a supplier quote. Match bore, collapse resistance and moving bend radius. | 1 | $18 | planning allowance | Source ↗ |
| Vacuum release valveEditable planning allowance, not a supplier quote. Match duty, supply and vacuum operation. | 1 | $25 | planning allowance | Source ↗ |
| Vacuum sensing elementEditable planning allowance, not a supplier quote. This is a budget allowance, not a price for the linked industrial family. | 1 | $35 | planning allowance | Source ↗ |
| Guarded cutting head materials & driveEditable planning allowance, not a supplier quote. In-house development head; no completed cutter product is implied. | 1 | $65 | planning allowance | Source ↗ |
| Shallow tray and cleanable cushioningEditable planning allowance, not a supplier quote. Validate crop contact and cleaning. | 1 | $25 | planning allowance | Source ↗ |
| Local stop and reset hardwareEditable planning allowance, not a supplier quote. Risk assessment can require additional safety control, contactors and validation. | 1 | $80 | planning allowance | Source ↗ |
| Contact bumper and input hardwareEditable planning allowance, not a supplier quote. Not a personnel-rated scanner or substitute for supervised separation. | 1 | $50 | planning allowance | Source ↗ |
| Moving hose and cable carrierEditable planning allowance, not a supplier quote. Select actual length, bend radius and brackets. | 1 | $25 | planning allowance | Source ↗ |
The Forem way
Choose the right component and see where it comes from.
Fabricate frames, fixtures and product-specific assemblies.
Combine crop knowledge with measured, responsive conditions.
Protect the harvest and preserve its identity.
Coordinate handling, release and delivery.
Bring field experience back into the next design.
A connected corporate vision: the greenhouse, the materials around it, the people who build it and the products that leave it.
Explore packing, storage & AI — with a parts list and build budget ↗A GREENHOUSE THAT WORKS TOGETHER
Bring us your crop, available space and goals. Connect the structure, growing systems and equipment around the way you want to grow.
Build your greenhouse with ForemInclude tomato trellis clips — 100 count as the starting point for your request.
Explore a 24 × 36 m growing bay, its supply store and water service area. Parts are modeled by function. Close-up views move the camera toward actual-scale components. The camera-led component journey shows where each part belongs. People and handling animations are omitted. Dimensions, exact product models and the final layout are matched to your project.
Growing row 03 / stem and support twine
One Forem network
Choose products, plan a project or request a produce program. Each route explains how prices, availability and delivery are confirmed.