Skip to contentFarm Fresh
to Market
Discuss a farm project
Menu

Forem / THE INTELLIGENT GROWING CHAIN

Small changes.
A different kind
of farm.

01—04

A roof that responds to sunlight. A pack that remembers its harvest. A store that tells you when something changes. Follow the connections—and decide which improvement earns its place.

Explore the system
Grape tomatoes on the vine
Forem GROWING SYSTEM · GROW → PACK → PROTECT → LEARN

THE IDEA

The smartest upgrade
starts with a useful question.

Where does the crop lose quality? Where does the team lose time? What can a simple sensor reveal? Build the answer from serviceable parts, local skills and measured results. Connect the whole chain as each improvement proves useful.

FOLLOW THE VALUE / SELECT A STATION

Four places to make a difference

01 / GREENHOUSE

Give the crop a climate that responds.

Start with a record of what the plants actually experience. Add shade, ventilation and irrigation in stages, then let each bay respond to its own measurements.

Find the parts in the greenhouse Explore the harvest machine concept
Grape tomatoes on the vine
Concept visualization / Greenhouse
THE NEXT HANDOFF

Crop stage + bay + harvest lot → packing house

HOW THE SYSTEM WORKS

The detail is
the difference.

  1. 01

    Measure where the crop lives

    Shield temperature and humidity sensors from direct radiation. Use canopy PPFD and its daily integral for crop light; a cheap lux board can demonstrate changes but cannot replace a quantum sensor.

  2. 02

    Move shade with a real mechanism

    A geared drive pulls a reinforced screen over supported guides. Size the cord, pulleys, mounting, torque and braking for travel and load. End limits stop motion; manual release keeps the bay usable.

  3. 03

    Coordinate air, water and light

    Ventilation exchanges air; circulation fans move it within the crop. Mist can cool through evaporation when the air allows it. High humidity, leaf wetness or low water pressure should inhibit mist.

  4. 04

    Verify, then copy the recipe

    Compare measured conditions and crop response. Share crop-stage targets between greenhouses, while allowing different local shade and vent positions. Mylar trials need before/after light maps and hot-spot checks.

CHOOSE THE DEPTH

Start where you are.
Build what you need.

An affordable place to start.

One sensing node beside a manual greenhouse. Learn where the temperature, humidity and daylight change before buying a drive.

  • Temperature / humidity + demonstration light board
  • Protected power, enclosure and sensor shield
  • Time-stamped record and a daily grower check
BEFORE YOU SCALE

Log a baseline through representative weather; compare readings with a reference instrument.

The monitoring pilot below itemizes a starting point.

MEASURE SUCCESS

Minutes outside the crop target

Compare canopy conditions at matching crop stages. A lower number is useful only if quality, water use and energy are also acceptable.

THE NEXT HANDOFF / HARVEST

A careful pick is
part of the growing system.

Follow the crop from a measured greenhouse row into the packing house. Explore a proposed, serviceable harvesting concept and the components behind each step.

Greenhouse crop rows and structure
CROP CONTEXT / CONCEPT VISUAL
The greenhouse scene provides crop context; the harvester is shown separately as a development design study.

ONE FRUIT / A CONTROLLED HANDOFF

See it.
Support it. Release it gently.

A guided lift and short approach slide position one suction cup above a low rolling base. Interchangeable tips adapt the contact size to the crop. A regular RGB camera guides approach; the tip-sensing study adds local acoustic feedback. The pepper configuration uses an electrically heated stem-cutting wire and a cushioned basket that supports the fruit before cutting. Both remain development designs awaiting physical crop trials.

03

REACH

One interchangeable cup

A short supported tool approaches one fruit at a time. Swap the compliant cup for the crop: a small grape-tomato tip or a larger-fruit tip, sharing one vacuum path.

Inspect component & source status
04

HOLD

Measured vacuum support

Cup-pressure feedback checks the hold through separation and transfer. The current design revision records the remaining detachment decisions.

Inspect component & source status

Part details distinguish seller-priced references, supplier options, and materials that need a quote or in-house fabrication. Build costs are planning inputs, not a Forem offer.

A CLOSER LOOK / THE CLIMATE LOOP

The same greenhouse.
Three different decisions.

Select a condition to see why a responsive greenhouse coordinates its equipment. This is control logic you can inspect, rather than a promise that one setting fits every crop.

ILLUSTRATED INPUT / NO LIVE FARM DATA

Temperature above target · humidity below ceiling

LOCAL CONTROLLER

Use the air’s capacity to cool.

Crop recipe + sensor health + limits
Shade

Move within crop-light limits

Vent

Open within weather limits

Mist

Pulse only with verified water flow

A brief mist pulse may cool the air as water evaporates. Recheck temperature, humidity and leaf wetness before another pulse. Crop stage, outside weather and water quality determine the actual settings.

Inspect the actual system components ↗

YOUR FIRST MODULE / GREENHOUSE

Open the parts list.
Make the numbers yours.

Start with a bounded pilot, then replace the assumptions with your own quotes and time study. Change the station above to explore a different part of the chain.

THE SCOPEOne monitoring node, manually operated greenhouse

No shade motor, solar subsystem, crop-light sensor, fan, mist system or whole-greenhouse installation is included in this pilot. Add scoped quotes before using the model for those upgrades.

Selected pilot parts · USD · sources checked 17 October 2026
Component / purposeQtyUnit costLine total
QT Py ESP32-C3 control board

Logs local inputs and reports over Wi-Fi.

Public retail reference / scope

Out of stock when checked. Arduino-compatible bare board; a replacement requires validation.

View source & buying options ↗
1board$9.95$9.95
SHT40 temperature / humidity board

Measures the air at a representative location.

Public retail reference / scope

In stock when checked. Add shielding, placement checks and calibration.

View source & buying options ↗
1board$5.95$5.95
VEML7700 demonstration light board

Shows a relative daylight response on the bench.

Public retail reference / scope

In stock when checked. Lux is not PPFD; not included as a crop-light control instrument.

View source & buying options ↗
1board$4.95$4.95
Enclosure, shield and mounting

Protects and positions the sensing node.

Planning allowance · edit below / scope

Editable material allowance; environmental suitability and actual takeoff are not established.

1set$35.00
Supply, cables and small hardware

Powers and connects a single monitoring node.

Planning allowance · edit below / scope

Editable allowance. No actuator, photovoltaic panel or battery included.

1set$25.00
Source-priced references$20.85
Editable material allowances$60.00
Selected parts subtotal$80.85

Public retail and manufacturer references are not Forem acquisition costs or a delivered offer. Stock, variants, freight and tax need confirmation. The lowest-cost board is one component of a working system.

01 / COST TO BUILD

Include the work.

02 / VALUE TO TEST

Earn the investment.

Benefits begin at zero. Enter measured inputs, or load a clearly hypothetical example to understand the arithmetic.

How the model works

Build budget = (selected parts + other quoted costs + assembly hours × loaded labor rate) × (1 + build reserve).

Annual labor value = minutes released ÷ 60 × days × hourly rate × economic realization.

Annual net benefit = labor value + recovered kilograms × net contribution per kilogram − added annual running costs.

Simple payback = build budget ÷ positive annual net benefit × 12 months. No positive benefit means no payback. The model does not forecast sales, crop yield, financing or taxes.

Three-year break-even = build budget ÷ 3 + added annual running costs. This is a target for gross annual benefits, not a forecast.

DESIGNED FOR THE DAY SOMETHING FAILS

A clever system
must still be
a working farm.

01Local first.

Keep time-critical controls local. Buffer readings when the network drops, mark stale data and restore the record when connectivity returns.

02A deliberate safe state.

Define each failure response for the site: wind, rain, overheating, stalled motion and empty water supply may require different actions. Retain manual operation and a local stop/reset.

03Power with a margin.

Solar can suit an intermittent motor and small node. Size peak motor current, worst-season sun and battery autonomy; continuous fans, pumps and refrigeration need separate energy budgets.

04Calibration is part of the product.

Mount sensors correctly, check against a reference, clean lenses and nozzles, test limits, inspect cords and bearings, and record the next service date.

05People approve the important changes.

A model can flag a pattern. Growers approve recipe changes; operators release food lots. Keep access controls, backups and a tested rollback.

ONE CONNECTED CORPORATION

Grow the crop.
Build the system.
Keep improving both.

Growing systems, materials, packing, distribution and technology belong in the same conversation. Start with one practical problem. Turn the result into a repeatable module—and make it useful to the next grower.

Meet the businesses behind the chain ↗Explore the component catalog ↗