Skip to contentFarm Fresh
to Market

FARM FRESH TO MARKET / INSIDE THE GREENHOUSE

Every part.
In its place.

01 / THE GROWING EXPERIENCE

Look closer. Explore the crop, examine every connection, and trace each component from the supply store to the growing system.

Explore all 212 components Configure six greenhouse modules
INSIDE THE GREENHOUSE 3DDrag to explore · scroll to zoom

Opening the greenhouse…

Preparing the crop, surfaces and component details.
FOLLOW THE COMPONENT

Tomato Trellis Clips — 100 count

0%

TIPSelect a part. Inspect its details and follow its route from the supply store to its working position.

View & accessibility

Keyboard: arrows to orbit, Shift + arrows to pan, + / − to zoom, Home for overview and Esc to pause.

ONE SEED. AN ENTIRE SYSTEM.

A small beginning. An identified batch.

Sow one seed into each propagation plug. Tray labels preserve the variety, sowing date and batch as the roots establish.

EXPLORE THE PARTS

Small details.
A complete growing system.

From the first frame connection to the clip around a tomato vine. Find a part, understand its job and follow it into the greenhouse.

212 parts across 9 greenhouse systems

212 parts to explore

Forem / CLIMATE BY DESIGN

A climate for every stage.
Every component connected.

Set a growing target. See how shade, air and water work together, from the floor beneath the crop to the canopy above it.
24 × 36 mGreenhouse footprint
1,248Scaled plant positions
8 double beds16 lines × 78 plants
0.32 mSpacing along each line

01 / THE CLIMATE RECIPE

One target. A coordinated response.

Each greenhouse measures its own conditions. Connected zones share the recipe; local controls respond to the crop in front of them.

Coordinate canopy light, fruit development and moisture removal.

Editable example recipe · tailor settings to cultivar, growth stage, location and grower measurements.

Explore the response

SCENARIO
100%Screen deployment
67%Vent opening request
EnabledMisting request
VentilateAir movement mode

Air VPD 1.70 kPa · steady-light equivalent 28.7 mol/m²/day. This screen cannot reduce light to the selected target even at full deployment. This shows control requests, not a prediction that the targets will be reached. The light estimate uses uniform area coverage and the selected material reduction; real canopy readings account for transmission and moving shadows. Real control uses changing measurements, hysteresis and local interlocks.

COMPARE / ADAPT / REPEAT

Learn from one house.
Respond in every house.

Choose a reference crop, compare the conditions and share its targets. Each greenhouse still measures its own light, temperature and humidity. A different crop stage keeps a different recipe.

INTERACTIVE SCENARIO · MANUAL READINGS

House A

Review this house’s targets
Shade request
100%
Vent request
17%
Mist request
Off
Air VPD
1.25 kPa

Targets: 24 mol/m²/day · 26°C · mist below 70% RH

This screen cannot reach the light target at full deployment.

House B

Review this house’s targets
Shade request
100%
Vent request
100%
Mist request
Enabled
Air VPD
2.11 kPa

Targets: 20 mol/m²/day · 25°C · mist below 72% RH

This screen cannot reach the light target at full deployment.

House C

Review this house’s targets
Shade request
100%
Vent request
17%
Mist request
Off
Air VPD
0.70 kPa

Targets: 16 mol/m²/day · 24°C · mist below 75% RH

This screen cannot reach the light target at full deployment.

The camera adds evidence.

Use repeatable crop images, harvest quality and growth records to select a reference. Equal sensor readings alone do not prove equal plant health, yield or quality. This page does not analyze live camera images.

The local controller keeps control.

The shared values are targets—not copied motor positions. Shade, ventilation and mist respond locally. Calibration, leaf wetness, actuator travel limits and manual override belong in the installed system.

02 / FROM THE GROUND UP

The layers beneath the crop.

Surface choices are alternatives. Layer depths, foundations and drainage follow the site; growing bags and slab beds use different root-zone details.

03 / THE SHADE DRIVE

Simple parts. A complete mechanism.

Sun→→→→→→→

Separate motor modules can make a greenhouse easier to expand and service. A shared crop recipe coordinates them, while each module retains its travel limits and manual control.

Solar power is sized for the whole daily load and motor starting current. Cable selection includes stretch, UV life and working tension.

04 / WORK WITH THE SUN

Place reflection with purpose.

Reflective film can redirect available light into a darker crop area. Start with the sun path and greenhouse orientation, then measure canopy light and leaf temperature across the day.

85.6° approximate sun elevation

Manual geometry study. This angle is not calculated as an optimum from sun elevation.

Solar time differs from clock time. Elevation alone does not determine reflector placement: azimuth, greenhouse heading, obstructions, target area and film properties also matter. Use flat, restrained surfaces and verify light uniformity.

MYLAR / POSITION + DIRECTION

A ray to the target.

Use the latitude, day and solar hour at left. Set the building direction and the crop point relative to a flat reflector.

ENUPSUNCROPREFLECTOR ORIGIN
Sun elevation / azimuth
85.6° / 0.0°
Ideal flat-panel tilt from horizontal
34.2°
Reflective face bearing from north
85.2°
Reflector-to-target distance
2.15 m

One ideal specular ray at one instant. This is not a measured light gain or an optimum greenhouse layout. Film wrinkles, diffuse reflection, covering transmission, shadows, leaf temperature and the moving sun still need evaluation. The 3D manual tilt at left is a separate illustration.

Geometry and sources

The panel normal bisects the directions toward the sun and crop target. Solar hour is true local solar time, not clock time. The studio uses approximate seasonal declination without atmospheric refraction.

NOAA solar-position relationshipsOregon State: law of reflection
Design basis, growing area & references

The model contains 1,248 individual plant positions over a 600 m² growing footprint within the 864 m² building. That is 0.48 m² per plant, with the remaining length reserved for cross-aisles and services. Plant number and training method are selected with the crop plan. The three recipes above are editable demonstration settings, not published cultivar optima.

Measure plant light with a suitable PAR sensor and integrate it over time. Coordinate circulation with ventilation; mist adds humidity and is constrained by evaporation and leaf-wetness conditions.

THE SAME GREENHOUSE. MORE POSSIBILITIES.

Start with shelter.
Build a living system.

A frame and a covering protect a crop. Thoughtful additions make that shelter responsive: a roof that opens, shade that travels, air that circulates, and water delivered where it is needed.

Our ambition is to make those capabilities accessible—one practical, serviceable component at a time.

THE STARTING POINT

React after the crop feels it.

A person checks the temperature, opens a vent, pulls a screen, waters a row and returns later to see what changed.

Observe → act → return
THE CONNECTED SYSTEM

Measure. Respond. Learn.

Each bay reports its conditions. Local controls move the shade, vent and mist within set limits. Growers compare the response and refine the recipe for that crop stage.

Sense → adjust → verify ↻

SMALL ADDITIONS. CLEAR COSTS.

Intelligence can
start small.

A low-cost board can begin the experiment. A working installation also needs power, protection, a suitable drive and commissioning. Explore what each price actually buys.

Selected bare boards$21USD · selected components

Start with a sensing core

A Wi-Fi board, air temperature/RH sensor and basic illuminance board let the team record and compare conditions.

What still needs to be included
  • Power, shield, enclosure, field wiring and assembly
  • Lux is not PPFD; crop-light control needs a suitable quantum sensor
Supplier reference 1 ↗Supplier reference 2 ↗Supplier reference 3 ↗

THE GREENHOUSE NETWORK

Learn from the best bay.
Respond to each plant.

A camera adds a second view of the crop: repeated images can help flag growth changes, canopy gaps or fruit-color changes for review. Light and climate sensors supply the measurements the image cannot.

Share the crop-stage targets and compare measured outcomes. Different greenhouses may need different shade, vent and mist commands to approach the same target. Equal commands do not mean equal crop conditions.

One growing environment. Three control scenarios.

CONTROL SCENARIO / 1

Use a shared recipe

Compare the same cultivar and growth stage. Each bay measures its own daily light and climate.

THE CURRENT HARVEST WORKSHOP / MECHANICAL STUDY

Roll. Raise.
Work at crop height.

The fixed mast guides a carriage carrying the crop tools and RGB camera. The supported approach stage moves one tomato suction cup with an interchangeable tip, or the pepper heated-wire head and support basket. Explore the connected mechanism, model dimensions and travel limits below.

Forem Labs / ROLL · LIFT · APPROACH

One cup. One grape tomato.
ONE SHARED PICKING HEAD
LOADING INTERACTIVE 3D

Forem Greenhouse Harvester · positioning model

Optional: gently part the canopy

Two soft guides beside the picking head could extend into the foliage, part leaves and retract. This is a motion illustration; force limits, snag response and plant damage need testing.

Move the picking head & inspect dimensions

WORKING ENVELOPE / METRES

Roll along the aisle.
Lift the whole tool carriage.

All dimensions are design assumptions for the greenhouse model. The controls move connected geometry; they do not operate equipment or establish load capacity.

Manual controls show roll, lift and approach. Use the picking cycle to follow the fruit into the catch basket and main case.

Grid spacing: 250 mm

TOOL HEAD / CLOSE APPROACH

Move the picking head 20 mm at a time.

The approach motor turns the screw. Its moving nut slides the deck and the single suction cup toward the crop. The camera stays on the lift carriage. The echo sensor moves with the tip to check the remaining gap.

Open the close-up, then advance three times to see the tool head move toward the same fruit. The camera view holds steady so you can see the gap close.

Aisle travel is held while the carriage is raised or the tools extend. This is a preview interlock, not a validated machine safeguard.

Overall running footprint
820 × 1,050 mm
Fixed mast height
2,600 mm
Current suction-cup height
1.49 m
Modelled bed-edge aisle
2.10 m
Lane centre toward near bed
+200 mm
Near wheel to bed edge
440 mm
All stowed hardware to near bed
Loading geometry

The full-hardware gap is smaller than the wheel gap. Both are model geometry only; foliage, crop movement, floor variation and safe operating clearance are unverified.

Full machine, mounting details & build budget →
Historical guided-head workshop & earlier budget

Earlier linear-lift workshop reference: a narrow aisle cart, a guided lift and a short-reach suction-and-cutting head. Its assembly steps and budget remain available for comparison. The Forem Greenhouse Harvester shares one supported suction cup, one ordinary camera, proposed close-range acoustic sensing and a guarded heated-wire stem cutter across tomato and pepper modes. Optional soft leaf guides part the canopy; crop fit and all handling outcomes need trials.

The following dimensions, assembly steps and costs describe the earlier single-cup guided-head cart. They do not price or specify the current mast, modular cup tooling or heated-wire system. Use the current machine build budget for that scope.

Earlier cart dimensions

0.62 m wide · 1.5 m mast · 0.3 m reach

Historical workshop reference · Earlier Forem linear-lift development architecture

EARLIER WORKSHOP SCENARIO

See the parts.
Count the working hours.

Start with sourced components, fabricate the frame and fixtures locally, then assemble, program and trial the machine. Change the labor assumptions to fit your team.

EARLIER GUIDED-HEAD BUILD / USD$3,056
Supplier-priced components
$286
Component planning allowances
$1,040
74 hours of in-house work
$1,332
Development reserve
$399

An adjustable development budget, not a production selling price. Freight, tax, business overhead and repeated redesigns are additional. A successful crop trial is required before performance can be stated.

Open the earlier workshop component list 24 LINE ITEMS + LABOR
ComponentQtyUnit / USDBasisExplore
Chassis tube, plates & fastenersEditable planning allowance, not a supplier quote. Material only; cutting, joining and finishing labor is separate.1$120planning allowanceSource ↗
Wheels, casters & hubsEditable planning allowance, not a supplier quote. Two driven wheel assemblies and two passive casters; verify load and hub fit.4$18planning allowanceSource ↗
37D gearmotor including encoderTwo light-cart candidates; gearmotor sizing and continuous duty remain to be validated.2$61supplier referenceSource ↗
Wheel encoderIncluded in each selected gearmotor; shown separately for service, not charged twice.2$0includedSource ↗
Dual motor driver, partial kitConnector assembly and suitable current limiting are required.1$70supplier referenceSource ↗
12V 7Ah reference batteryReuses the 17 October battery price reference; actual robot energy, peak current and charger are not selected. Supplier page/data availability conflict needs confirmation.1$40supplier referenceSource ↗
Fuse, disconnect, DC converter & harnessEditable planning allowance, not a supplier quote. Specify battery protection, connector ratings and voltage conversion.1$55planning allowanceSource ↗
RGB tool camera moduleCamera alone; no depth module or trained harvesting model is included.1$29supplier referenceSource ↗
Capture/control computer boardOut-of-stock reference; memory, supply and camera adapter are included only in the harness allowance, pending exact selection.1$19supplier referenceSource ↗
Mast extrusion, brackets & guardingEditable planning allowance, not a supplier quote. Verify stiffness and resistance to tipping at full reach.1$90planning allowanceSource ↗
Vertical and short-reach guide componentsEditable planning allowance, not a supplier quote. Budget envelope for guides and carriages; replace with load- and travel-specific quotes.1$160planning allowanceSource ↗
Lift drive, transmission & anti-drop partsEditable planning allowance, not a supplier quote. A complete vertical-axis load-holding design may exceed this allowance.1$120planning allowanceSource ↗
Compliant wrist materials & hardwareEditable planning allowance, not a supplier quote. In-house machined/printed non-contact structure; validate force and cleanability.1$45planning allowanceSource ↗
Food-contact compliant cup & fittingEditable planning allowance, not a supplier quote. Select a size for the actual tomato; purchase a documented contact material.1$30planning allowanceSource ↗
Mini vacuum pump, bench candidateA larger, continuous-duty pump may be required after leakage and thermal testing.1$6supplier referenceSource ↗
Filter and cleanable catch vesselEditable planning allowance, not a supplier quote. Allow for replaceable elements and low pressure drop.1$25planning allowanceSource ↗
Vacuum hose and fittingsEditable planning allowance, not a supplier quote. Match bore, collapse resistance and moving bend radius.1$18planning allowanceSource ↗
Vacuum release valveEditable planning allowance, not a supplier quote. Match duty, supply and vacuum operation.1$25planning allowanceSource ↗
Vacuum sensing elementEditable planning allowance, not a supplier quote. This is a budget allowance, not a price for the linked industrial family.1$35planning allowanceSource ↗
Guarded cutting head materials & driveEditable planning allowance, not a supplier quote. In-house development head; no completed cutter product is implied.1$65planning allowanceSource ↗
Shallow tray and cleanable cushioningEditable planning allowance, not a supplier quote. Validate crop contact and cleaning.1$25planning allowanceSource ↗
Local stop and reset hardwareEditable planning allowance, not a supplier quote. Risk assessment can require additional safety control, contactors and validation.1$80planning allowanceSource ↗
Contact bumper and input hardwareEditable planning allowance, not a supplier quote. Not a personnel-rated scanner or substitute for supervised separation.1$50planning allowanceSource ↗
Moving hose and cable carrierEditable planning allowance, not a supplier quote. Select actual length, bend radius and brackets.1$25planning allowanceSource ↗
What the crop trials must establish
  • The shown dimensions package the idea; they are not a released fabrication drawing or a verified fit to every greenhouse aisle.
  • Test cup diameter, material, vacuum and dwell against the actual grape-tomato size and ripeness; evaluate seal failure, skin marking and delayed bruising.
  • Validate reachable fruit and pedicel localization, tool clearance and selective separation. A single RGB camera is not a guarantee of 3D depth or hidden-stem detection.
  • Measure payload, rolling resistance, slope, drive heating, stopping distance, center of gravity and mast deflection. Add a rated anti-drop mechanism to the vertical axis.
  • Use guarded cutting motion and a risk-assessed independent stop path. A hobby controller, bumper or red button alone is not a validated personnel-safety system.
  • Prove cleaning, food-contact surfaces, water ingress control and battery isolation before a supervised greenhouse trial. No throughput, labor saving or commercial readiness is asserted.
Research: suction support combined with cutting ↗Piab: compliant vacuum handling of fruit ↗Pololu: gearmotor load and thermal limits ↗igus: configurable linear axes and slides ↗Raspberry Pi: camera specifications and interfaces ↗

The Forem way

Own the connections.
Create more from every step.

01

Source

Choose the right component and see where it comes from.

02

Make

Fabricate frames, fixtures and product-specific assemblies.

03

Grow

Combine crop knowledge with measured, responsive conditions.

04

Pack

Protect the harvest and preserve its identity.

05

Move

Coordinate handling, release and delivery.

06

Improve

Bring field experience back into the next design.

A connected corporate vision: the greenhouse, the materials around it, the people who build it and the products that leave it.

Explore packing, storage & AI — with a parts list and build budget ↗

A GREENHOUSE THAT WORKS TOGETHER

Your growing vision.
Let’s put it in place.

Bring us your crop, available space and goals. Connect the structure, growing systems and equipment around the way you want to grow.

Build your greenhouse with Forem

Include tomato trellis clips — 100 count as the starting point for your request.

About this greenhouse model

Explore a 24 × 36 m growing bay, its supply store and water service area. Parts are modeled by function. Close-up views move the camera toward actual-scale components. The camera-led component journey shows where each part belongs. People and handling animations are omitted. Dimensions, exact product models and the final layout are matched to your project.

Text & 2D location guide
STOREGREENHOUSEWATER

Growing row 03 / stem and support twine

  1. Start in the supply store. Identify and prepare tomato trellis clips — 100 count for its task.
  2. Follow the route. The part travels from storage through the farm to its working area.
  3. Find its place. Growing row 03 / stem and support twine. Attach individual crop stems to twine on an engineered trellis. Clips support the plant; they do not grip or pick the fruit.

One Forem network

From the greenhouse
to the buyer.

Choose products, plan a project or request a produce program. Each route explains how prices, availability and delivery are confirmed.

  1. 01 / See itInside the greenhouseExplore all 212 components in place and follow any part from storage to the crop.
  2. 02 / Choose itAll products & quote basketOne catalog for named products and greenhouse parts. Add items and request a single quote.
  3. 03 / Build itSetups, electronics & robot kitsThe complete greenhouse setup from starter to full build, plus DIY AI robot kits.
  4. 04 / Buy the cropFarm Fresh to MarketExplore the documented tomato, citrus, pepper, vegetable and fruit range. Request your pack and supply program.
  5. 05 / Build the farmFarm Infrastructure salesStructure, growing systems and installation scope for a complete farm setup. A separate sales business within Forem.
  6. 06 / Plan itGreenhouse Living SystemExplore the greenhouse, growing systems, shared intelligence and energy planning under Forem Farm Infrastructure.